The Steffen Systems model 950 bale accumulator is a machine built to tow directly behind the baler to create tight, uniform packages of 10 bales. Its precise functions will keep up with any baler’s production. The hydraulics simply plug into your tractor - no need for extra pumps. The bales are pulled away from the baler automatically so the bales won’t jam. The dump system is matched to ground speed so each package is dropped without spreading. NO TIPPING TABLES TO LET YOU DOWN.

 

The Steffen Systems model 950 bale accumulator is specifically made for packaging 10 bales together to form a tight package measuring 2.4 meters x 1.85 meters(a real tie system) ready to load directly onto a truck using the Tenpack 10 Bale Grab. This completely eliminates the need for someone to stack bales on the truck to get a full load. Also, it eliminates the need to hand stack at the shed, and hand load out at a later date. This is the system to eliminate all manual handling, and the need for anybody to work at dangerous heights.

 

Connecting the accumulator to the baler is made easy by using a simple bolt-on hitch that connects to the rear of the bale chamber. This allows the accumulator to be unhooked away from the baler in about 2 minutes (if required). The accumulator transports easily behind the baler.   

 

 

 

 

 

The Steffen Systems model 1550 bale accumulator is a machine built to tow directly behind the baler to create tight, uniform packages of 15 bales. Its precise functions will keep up with any baler’s production. The hydraulics simply plug into your tractor, no need for extra pumps. The bales are pulled away from the baler automatically so the bales won’t jam. The dump system is matched to ground speed so each package is dropped without spreadin. NO TIPPING TABLES TO LET YOU DOWN.

 

The Steffen Systems model 1550 bale accumulator is specifically made for packaging 15 bales together to form a tight package measuring 2.4 meters x 2.4 meters (3x5) ready to load directly onto a truck using the Tenpack 15 Bale Grab. This completely eliminates the need for someone to stack bales on the truck to get a full load. Also, it eliminates the need to hand stack at the shed, and hand load out at a later date. This is the system to eliminate all manual handling, and the need for anybody to work at dangerous heights.

 

Connecting the accumulator to the baler is made easy by using a simple bolt-on hitch that connects to the rear of the bale chamber. This allows the accumulator to be unhooked away from the baler in about 2 minutes (if required). The accumulator transports easily behind the baler.

 

 

 

Tenpack hitches are specifically designed to hitch the SteffenSystems Accumulator to the rear of the baler. Being a six piece retro fit, which allows the hitch to adapt to any common small square baler. With the flow control valve bracket and the electrical plug bracket mounted on the hitch this makes for a fast and easy fit up to the baler.